Make sure to take measurements before installing a solar plant on your roof; otherwise, your government subsidy will be rejected..

To find relief from rising electricity bills, people across the country are increasingly turning to rooftop solar schemes. The government offers substantial subsidies for installing solar panels under these schemes, providing significant financial assistance to the public. However, applications are sometimes rejected due to minor technical errors, causing applicants to miss out on the subsidy. If you are considering installing solar panels on your roof, ensure you have accurate measurements of your roof space and are familiar with the relevant guidelines before submitting your application.

Why are accurate measurements necessary before installing a solar system?
The capacity of a solar power system is determined by the available sunlight and the vacant space on your roof. If you apply for a capacity that does not match the actual space—either too high or too low—your application may be rejected during the inspection process. Generally, a 1 kW solar system requires approximately 10 square meters of shade-free space. If sunlight is obstructed by structures like water tanks, tin sheds, or walls, an incorrect assessment of the available space can lead to a failure in the system's layout.

Four key points to keep in mind:
When applying through the portal of your electricity distribution company (DISCOM), ensure that the capacity you select (e.g., 2 kW or 3 kW) aligns with the actual space available on your roof. During the physical verification, an engineer will cross-check these measurements.

To be eligible for the solar scheme, your electricity connection must be classified as 'domestic,' and the meter must be registered in your name. Furthermore, the consumer details provided on your electricity bill must exactly match the information entered in your application.

Always have the installation carried out by a vendor registered on the national portal. The government does not provide subsidies for solar panels installed by non-registered vendors or those that do not meet established quality standards. When installing a solar panel structure on your roof, ensure that the roof’s framework is capable of supporting its weight. Any setup installed in violation of technical standards may be rejected by the department.

To fully avail of government subsidies, it is essential to have your roof accurately measured by an authorized vendor or technical expert before submitting an online application through the official portal; this ensures that there is no discrepancy between the submitted documents and the actual physical conditions.

Disclaimer: This content has been sourced and edited from NDTV India. While we have made modifications for clarity and presentation, the original content belongs to its respective authors and website. We do not claim ownership of the content.