india employmentnews

Cooler Using Tips: Do not make this mistake while running the cooler, otherwise the room will be filled with humidity

 | 
d

Cooler Using Tips: If the cooler is not used properly in this season, then the room becomes humid and sticky heat is felt. That is why we will tell you some methods which will be useful for you.

Cooler Using Tips: In many states of India, the scorching heat was troubling people a lot since April. But due to the arrival of monsoon, the level of heat has reduced a bit. But still the heat has not reduced so much that people can get relief at all. Many people are still using coolers in their homes. But not everyone can afford its budget. 

Many people use coolers in their homes to avoid the heat. But if the cooler is not used properly in this season, then the room becomes humid and sticky heat is felt. That is why today we will tell you some methods that you have to try while using the cooler. With which you will be able to avoid humidity. 

Do not use the cooler by placing it close to the wall

Many people keep coolers close to the edge when they use them in summer. And on most such occasions, people stick the cooler to the wall to save space in the room. If the cooler is stuck to the wall, then it will not be able to give cool air properly. Because then it will not be able to draw air from outside. And the air coming out from behind will be blocked. Due to this, the room will become humid. So that is why you have to take special care of this thing. The cooler should never be kept close to the wall. 

Do not fill hot water

In summers, water in tanks kept in the house generally gets heated. People fill it in the cooler at night with the help of pipes. If you do this, then when the hot water goes to the cooling pad or the grass covered area, the fan will blow out hot air. This will cause humidity in the room. That is why always use normal water or cold water in the cooler. If you want, you can also put some ice cubes in the cooler which will help the water to cool down. 

Soak it in advance 

When you are using a cooler with a cooling pad or grass, first wet the cooling pad or grass placed on the side with water. Because when the grass is wet, as soon as you turn on the cooler, cool air will come immediately. Otherwise, it takes some time for cool air to come. And till then, humidity remains in the room.